Human Cremation Systems
Are you tired of costly repairs to your retort
crematory?
Bestech is pleased to offer Therm-Tec's newly designed Human
Cremation Systems!
Therm-Tec Crematories are a modular Crematory that is a total
packaged system. The units are complete with all components and
electrical systems and are pre-tested at the factory before
shipment. The burners and controls are constructed under the
Underwriters Laboratories # 508A.
The Crematory design is the latest "State Of The Art" construction
using composite ceramic lining in the upper section of the unit for
low heat transfer and storage, with rapid pre-heat and cool down.
The composite ceramics were developed by N.A.S.A. for thermal
protection on space vehicles. The floor and side walls (to 18" high)
are constructed of heavy duty 3,000 degree refractory,
monolithically cast for abrasion resistance during loading and clean
out.
Therm-Tec Crematories are the only units utilizing a redundant
afterburner system to assure "AIR QUALITY" discharge standards are
met due to a possible secondary burner failure during a burn cycle.
Dwell time in the secondary combustion chamber exceeds 1.5 seconds.
The Crematory construction is NOT the OLD STYLE "Retort" type
Crematory that is often costly to repair (hearth replacements), but
rather a much improved design which meets the performance and
technology levels that are required by today's operators.
| Benefits of a Therm-Tec Crematory: | |
|
|
The floor of the Crematory is sloped to the back of the unit for liquid control and features sacrificial replaceable hearth tiles. |
|
|
Loading height is 20" and is compatible with a "Church Truck". No additional elevating (loading) equipment is required. |
|
|
Remains are removed from the front of the main chamber into a stainless steel receptor. |
|
|
For heat protection the Crematory has a 5" air cooled facade surrounding the unit. Rear panels are insulated for almost silent operation. |
|
|
The burner in the main chamber is positioned for direct flame contact with the body and assures complete combustion. |
|
|
The crematory is furnished with three 6 foot refractory lined stack sections as standard on all models. |